Battery and Energy Storage Glossary
Plain definitions of battery, storage, tariff and finance terms, from C-rate and state of health to demand charges and APR, with worked examples.
Battery basics
- C-rateC-rate is charge or discharge current relative to battery capacity: 1C empties a pack in an hour, 0.5C in two. How to calculate it and why it matters.
- Calendar ageingCalendar ageing is capacity a lithium battery loses over time, even unused. Heat and high charge speed it up. What it costs, and how to slow it down.
- Cycle lifeCycle life is how many charge-discharge cycles a battery lasts before reaching a set capacity. Why the conditions matter, and how to estimate cost per kWh.
- Depth of discharge (DoD)Depth of discharge is the share of a battery’s capacity used in a cycle. How it sets usable kWh and cycle life, with a worked lifetime energy comparison.
- Kilowatt vs kilowatt-hour (kW vs kWh)A kilowatt (kW) measures power, the rate of energy flow. A kilowatt-hour (kWh) measures energy, the amount used or stored. Bill and battery examples.
- LFP battery (lithium iron phosphate)An LFP battery is a lithium-ion battery with a lithium iron phosphate cathode: stable, long-lived, heavier than NMC. How to size one for home backup.
- State of charge (SoC)State of charge is how full a battery is now, as a percentage of its present capacity. How a BMS estimates it, and why LFP gauges can jump near the ends.
- State of health (SoH)State of health compares a battery’s present capacity with its capacity when new. How to calculate it, how it is measured and what 80 per cent means.
- Thermal runawayThermal runaway is a self-sustaining reaction that makes a lithium cell overheat uncontrollably. What triggers it, warning signs and how designs limit it.
Storage systems
- Battery management system (BMS)A BMS monitors each cell’s voltage and temperature, estimates charge and health, balances cells and disconnects the battery if limits are breached.
- Energy management system (EMS)An EMS is the control layer that decides when a battery system charges or discharges, using load, tariff and forecast data. It largely determines savings.
- Power conversion system (PCS)A PCS is the bidirectional inverter in a battery system. It converts between AC and DC, and its rating caps power flow, whatever the battery size.
- Round-trip efficiency (RTE)Round-trip efficiency is the share of stored energy you get back. Why cell and system figures differ, and what the losses do to storage arbitrage maths.
Tariffs and savings
- Demand chargeA demand charge bills your highest recorded load, not the units you used. How it is measured, a worked example, and what it means for a battery in India.
- Energy arbitrageEnergy arbitrage stores electricity when it is cheap and uses it when it is dear. How losses and battery wear cut the real saving, with worked maths.
- Peak shavingPeak shaving uses a battery to hold grid demand under a set ceiling and lower the demand charge. How it works, how to size it, and a worked example.
- Time-of-day tariffA time-of-day tariff prices electricity by the hour it is used. How ToD windows, rebates and surcharges work, with a worked bill and the case for storage.
Rules and finance
- AIS 156AIS 156 is the Indian safety standard for electric two- and three-wheelers, covering battery, BMS and charger. What it tests, and what to ask a seller.
- APR (Annual Percentage Rate)APR folds interest and fees into one yearly figure so loans can be compared. How it differs from flat rates, with worked examples, and where to find it.
- Viability gap funding (VGF)Viability gap funding is a capital grant that makes a project bankable at a price buyers will sign. How VGF works for grid storage, and who it covers.