Key facts

  • •Energy in kWh = power in kW × time in hours
  • •One “unit” on an Indian electricity bill is 1 kWh
  • •Think of kWh as the size of the tank and kW as the width of the pipe
  • •A battery has both ratings, and they are independent
  • •C-rate is the ratio that connects them: kW ÷ kWh

Worked examples

At home: a 2 kW load running for three hours uses 2 × 3, or 6 kWh, which is six units. A battery holding 10 kWh has enough energy for that. Paired with a 1 kW inverter, it still cannot run the load, because the limit is the pipe and not the tank.

At a factory: suppose a site wants to cut a 200 kW peak that lasts two hours. It needs 200 kW of power and 200 × 2, or 400 kWh, of usable energy. With an illustrative 90 per cent usable window, that is about 444 kWh of nameplate capacity, and the discharge rate is 200 ÷ 444, or about 0.45C.

Why buyers need both numbers

Quotes routinely lead with one. A large tank with a narrow pipe cannot serve a sudden demand, and a wide pipe on a small tank empties in minutes. Different jobs also need different shapes.

  • •Peak shaving: high power for a short period
  • •Solar shifting: moderate power for a long period
  • •Backup: power set by the load, energy set by the outage
  • •Power quality support: very high power for a very short period

The same split on a bill

A commercial electricity bill often charges for both. Energy charges follow the units consumed in kWh. Demand charges follow the highest power drawn in a measuring interval, often stated in kVA, the apparent power, which also counts reactive power and is usually a little above kW on a real site. This is why a brief spike can cost so much while using very little energy. Confirm the units and interval on your own tariff schedule.

Common mistakes

  • •Writing “kW per hour” when kWh is meant
  • •Reading “a 100 kW battery” as a statement of how much energy it stores
  • •Comparing price per kWh when one quote uses nameplate capacity and the other usable capacity
  • •Sizing a system from monthly bills alone, which do not show how tall or how long the peaks were

Frequently asked questions

How long will a 5 kWh battery run a 1 kW load?+

Up to five hours in theory, using 5 ÷ 1. In practice, multiply by the usable share and the inverter efficiency. At an illustrative 80 per cent and 90 per cent, that gives 5 × 0.8 × 0.9 ÷ 1, or about 3.6 hours.

Is a kVA the same as a kW?+

Not quite. A kW is real power doing work, while a kVA is apparent power, the total the wiring and equipment must carry. They are equal only at unity power factor. Inverter ratings and many demand charges use kVA, so check which one applies.

Read more

Related terms

Is storage right for your site?

Send us a month of electricity bills and your load profile, and we will tell you what a battery would save — including when it would not pay.

All glossary terms