State of health (SoH)
State of health (SoH) is a battery’s condition compared with when it was new, usually its present full capacity as a percentage of rated capacity. A 100 Ah pack that now holds 88 Ah has an SoH of 88 per cent.
Key facts
- •SoH = measured capacity ÷ rated capacity × 100
- •It falls through both cycling and the passage of time, and the loss is permanent
- •End of life is commonly defined as 80 per cent of original capacity
- •Rising internal resistance is the other half of ageing: more heat and less power under load
- •An app or BMS figure is an estimate; a controlled capacity test is the measurement
A worked example
Using an illustrative 51.2 V, 100 Ah pack rated at 5.12 kWh, a full capacity test returns 88 Ah. SoH is 88 ÷ 100, or 88 per cent, and the pack now stores 88 Ah × 51.2 V, or about 4.51 kWh.
If it gave 80 km on a charge when new under the same conditions, expect roughly 80 × 0.88, or about 70 km, now. The same arithmetic prices a used pack: one at 80 per cent SoH holds about 4.1 kWh, and it is that figure, not the rating on the label, that should be compared with a new pack’s cost per kWh.
How it is measured
The reliable method is a controlled test: charge fully, discharge at a stated current to the cut-off voltage, and count the amp-hours. The result depends on temperature and current, so results should state both.
A battery management system estimates SoH continuously from charge counted and from voltage behaviour. Methods differ between makers, so two systems’ figures are not always comparable. A headline figure can also hide one weak cell group, which limits the whole pack; a cell voltage readout shows the spread.
Why it matters to a buyer
SoH is the number behind resale value, warranty claims and financing assumptions. If a warranty promises a capacity at a given age, read how that capacity will be tested and under what conditions. In a hot climate, plan on SoH falling faster than a figure quoted at 25 °C suggests.
A pack below 80 per cent has not necessarily stopped being useful. End of life is a definition, not a cliff, and many packs work on with shorter range. Sudden collapse, swelling or heat is different, and needs inspection.
Frequently asked questions
What is a good state of health for a used lithium battery?+
It depends on the job and price, but ask for a test result rather than a display reading. A figure well above 80 per cent, with cell voltages closely matched and no damage history, is a reasonable starting point. Below that, price it on the capacity it actually holds.
Can state of health be restored?+
Lost capacity from ageing cannot be recovered. Balancing can restore capacity that was only unavailable because cells had drifted apart, so a low reading sometimes improves after a proper balance. Any claim to rejuvenate aged cells deserves scepticism.
Read more
- Buying a Used or Refurbished Lithium Battery: What to Check Buying guide
- EV and Battery Finance: What Lenders Need to Know Policy
- Reading a Lithium Battery Warranty: What “Five Years” Actually Covers Buying guide
- Your E-Rickshaw’s Range Dropped. Here Is How to Find Out Why. Performance
- BMS, PCS, EMS and SCADA: The Control Stack Inside a Battery Storage System Explainer
- Chinese Battery Testing and Pack Assembly Equipment: Who Makes What Industry
Related terms
Thinking about upgrading?
Talk to our team about the right pack for your vehicle, and about EMI options that keep the monthly outgo close to what you already spend.
Popular: Lithium e-rickshaw battery