Energy arbitrage
Energy arbitrage is charging a battery when electricity is cheap and discharging it when electricity is expensive, keeping the difference. For a site behind the meter, the gain is units not bought at the high rate rather than units sold.
Key facts
- •The headline value per cycle is the spread between the two rates multiplied by the energy shifted.
- •Losses mean you buy more units than you get back.
- •Break-even: the dear price must exceed the cheap price divided by round-trip efficiency.
- •Each cycle also uses up some of the battery’s life, and that cost belongs in the arithmetic.
- •On its own it is often a thin margin; it usually works when stacked with other duties.
How it works
Under a time-of-day tariff, the battery takes in units during the rebate window and releases them during the surcharge window. The meter then records less consumption at the expensive rate and more at the cheap rate.
Three things reduce the headline before it reaches the bank account: round-trip losses, degradation, and window length. If the peak window is shorter than the battery’s duration, part of the stored energy spills into normal hours, where the spread is smaller.
Worked example
These figures are illustrative. Off-peak power costs ₹4 per kWh and peak power ₹9, a headline spread of ₹5. At 85 per cent round-trip efficiency, each kWh delivered needs about 1.18 kWh bought, so a stored unit really costs ₹4 ÷ 0.85, or about ₹4.71. The real spread is about ₹4.29, some 14 per cent less.
Shifting 500 kWh a cycle is therefore worth about ₹2,150, not ₹2,500. The break-even peak price here is about ₹4.71; below that, shifting loses money before wear is counted.
Now value battery wear at an assumed ₹2 per kWh delivered. The margin falls to about ₹2.29 per kWh, or about ₹1,150 a cycle. Your own wear figure depends on the system’s price, cycle life and usable capacity.
Why it matters to a buyer in India
The spread is set by a regulator and can move in either direction at the next tariff order. A case that works only at today’s spread carries that risk for the life of the asset. The sturdier case combines shifting with demand-charge reduction and, where available, rooftop solar that would otherwise be exported cheaply.
Indian conditions also matter: cooling load in hot months lowers round-trip efficiency, which narrows the spread you capture.
Common mistakes
These errors overstate the saving most often:
- •Subtracting one tariff from the other and calling the result the saving.
- •Using a cell-level or inverter-level efficiency instead of the figure at the point of connection, with auxiliary load counted.
- •Leaving degradation out of the model.
- •Discharging fully into the ToD window, leaving nothing for a demand spike later that day.
Frequently asked questions
How large does the tariff spread need to be for arbitrage to pay?+
There is no single figure. As a minimum, the expensive rate must exceed the cheap rate divided by round-trip efficiency, and the remaining margin must then cover the wear on the battery and leave a return on its capital cost. Test your case with your current tariff and with a narrower spread.
Can a battery charged from rooftop solar do arbitrage?+
Yes, in effect. Storing surplus solar and using it after sunset moves energy from a low-value period to a high-value one. The relevant gap is between what an exported unit earns and what an imported unit costs. The wider that gap, the stronger the case, and export rules vary by state.
Read more
- Home Battery Storage in India: Is a BESS Worth It for Your House? Home storage
- Battery Storage for Factories and Offices: Where the Savings Actually Come From C&I storage
- Time-of-Day Tariffs in India: What They Mean for Battery Storage C&I storage
- AC-Coupled vs DC-Coupled Solar-Plus-Storage: Which Architecture Fits Your Site C&I storage
- Grid-Scale Battery Storage in India: What It Does and Why It Is Growing Grid storage
- How Grid-Scale Battery Storage Makes Money Grid storage
Related terms
Is storage right for your site?
Send us a month of electricity bills and your load profile, and we will tell you what a battery would save — including when it would not pay.