EnerKey Battery Equalizers and BMS Boards
EnerKey’s BMS boards, active balancers and bench equalizers: what each does, which suits a service workshop, and the limits of balancing.
Published: 20 November 2026
Industry · 4 min read
At a glance
- •EnerKey, a brand of Shenzhen Juyi Science and Trade, founded in 2015
- •A small company, which also sells under other brand names
- •Battery management systems (BMS), active balancers and bench battery equalizers
- •Suits pack makers, battery service centres and repair workshops
What EnerKey makes
EnerKey started in battery management systems and moved into balancing and maintenance equipment. Its products sit at two points in a pack’s life: inside the pack while it is in use, and on the workshop bench when it comes back for service.
- •BMS boards. Hardware and smart boards for packs from 2 to 32 cells in series, with Bluetooth apps, remote monitoring and the usual communication ports (UART, RS485 and CAN).
- •Active balancers. Boards fitted inside a pack that move charge between cells to keep them level during use.
- •Battery equalizers. Bench machines that bring every cell group in a pack to the same voltage. Some models only discharge high cells; others charge low cells and discharge high ones. The range covers packs of up to 24 or 48 cells.
EnerKey’s EK model codes are also seen in India under resellers’ own prefixes, so check the label to confirm a unit is genuine.
Strengths
- •Practical, affordable tools for servicing and repairing packs
- •A wide BMS range covering e-bikes, e-rickshaws, energy storage and inverters
- •Equalizers that handle LFP, NMC and LTO cells, with adjustable current
Limitations
- •A small company, with limited after-sales support outside China
- •Not a cycler maker: an equalizer levels cells but does not measure capacity
- •No formal certifications listed publicly
Who it suits
Pack makers balancing packs before dispatch, service centres recovering packs whose cells have drifted apart, and energy-storage installers maintaining banks in the field.
Before you buy
- •For packs of up to 24 cells, the 24-cell models that both charge and discharge are the most useful
- •In charge-and-balance mode, keep the charger current within the equalizer’s balance current
- •Ask the factory for an India price and compare it with local resellers
Before buying from any Chinese supplier
Whichever maker you choose, the same checks apply: the exact specification you need, software that exports your data, 230 V operation, a calibration certificate, local service and spares, a factory acceptance test with your own cells, and the full landed cost from your customs agent. Our overview of Chinese battery test and assembly equipment sets these out and compares the other makers in the series.
Terms in this article
Frequently asked questions
What does a battery equalizer do?+
It brings every cell group in a series pack to the same voltage, by discharging the high groups and, on some models, charging the low ones. It is used before a pack ships and when one comes back for service.
Can balancing fix a weak cell?+
No. Balancing levels cells that have drifted apart, but a cell that has lost capacity will drift low again. If the same group keeps falling behind after balancing, the cell needs replacing.
Want this applied to your own numbers?
Every solution page carries a calculator that shows its own arithmetic — storage savings, lithium against lead-acid, and home pack sizing.