A multi-channel battery cycler testing cells and a pack
Part of our series on Chinese battery equipment. This is a profile, not a recommendation or a ranking. Details are from the company’s published material as of November 2026, and figures it states about itself are its own claims. Models, specifications and prices change, so confirm them with the company before buying. The overview of all the makers groups them by the size of plant they suit.

At a glance

  • •Neware Technology, founded in 1998 and based in Shenzhen, Guangdong
  • •Privately held
  • •Best known for battery cyclers: charge-discharge testers for cells, modules and packs
  • •Claims more than 43,000 customers worldwide
  • •Suits battery labs, cell makers’ quality-control rooms and pack assemblers

What Neware makes

A cycler charges and discharges a battery on a programmed schedule and logs every reading. That is how a capacity is measured rather than taken from a label, and how a cycle-life claim is checked. Neware’s range runs from testers for button-sized coin cells to cabinets for large packs.

  • •Cell testers. Multi-channel units (the CT and BTS series) for coin, cylindrical, pouch and prismatic cells, used for capacity checks, cycle-life tests and grading.
  • •Pack testers. Cabinets for modules and packs. One listed example, the BTS-60V100A, has eight channels from 0.12 to 60 V and up to 100 A each, which covers 48–60 V e-rickshaw and two-wheeler packs.
  • •Regenerative testers. Models that return discharged energy to the grid instead of turning it into heat. They cost more to buy and less to run when testing at high power for long hours.
  • •Environmental chambers. Temperature, humidity and explosion-proof chambers for testing a battery in heat and cold.
  • •Software. Its BTS test software, with data analysis and links to factory test-management systems.

The testers handle LFP and NMC lithium-ion as well as nickel and lead-acid chemistries.

Strengths

  • •A familiar name in battery labs, so results in its data format are widely recognised by researchers and customers
  • •A range wide enough that one supplier can cover cells, modules and packs
  • •High accuracy on its laboratory models, which Neware quotes at a few hundredths of a per cent of full scale
  • •Mature software, which matters more than the hardware once a plant is running many channels

Limitations

  • •Priced above smaller Chinese brands
  • •Factory-scale test lines need customisation and longer lead times
  • •Service comes mainly from China or through distributors, so ask who supports it in India

Who it suits

Battery researchers, cell makers’ quality-control labs, testing labs, and EV and energy-storage pack makers who want to measure what their cells actually deliver. For a pack assembler it is usually the second purchase after a welder: the machine that turns a supplier’s datasheet into measured numbers.

Before you buy

  • •Specify the highest pack voltage and current with headroom: for 48–64 V packs, a channel of about 100 V and 50 A leaves margin
  • •Ask whether the model is regenerative, and compare the extra cost with the electricity it saves at your test hours
  • •Confirm the software licence terms and that export to Excel or CSV is included
Measuring capacity is half the job. Grouping cells of close capacity and resistance is what makes a pack last, as our explainer on cell balancing sets out.

Before buying from any Chinese supplier

Whichever maker you choose, the same checks apply: the exact specification you need, software that exports your data, 230 V operation, a calibration certificate, local service and spares, a factory acceptance test with your own cells, and the full landed cost from your customs agent. Our overview of Chinese battery test and assembly equipment sets these out and compares the other makers in the series.

Terms in this article

Frequently asked questions

What is a battery cycler?+

A machine that charges and discharges a cell, module or pack on a programmed schedule and logs every reading. It is how capacity is measured rather than read off a label, and how a supplier’s cycle-life claim is checked.

Is a regenerative battery tester worth the extra cost?+

It depends on how hard it works. A regenerative tester returns discharged energy to the grid instead of turning it into heat, so it costs more to buy but less to run. The more hours of high-power testing a plant does, the sooner the saving covers the difference.

Want this applied to your own numbers?

Every solution page carries a calculator that shows its own arithmetic — storage savings, lithium against lead-acid, and home pack sizing.

Read next

All articles