Xiamen Tmax: Battery Lab and Pilot-Line Equipment
Tmax supplies nearly every machine for a battery lab or small cell and pack line. Where a one-stop supplier helps, and where it falls short.
Published: 20 November 2026
Industry · 4 min read
At a glance
- •Xiamen Tmax Battery Equipments, founded in 1995 and based in Xiamen, Fujian
- •A one-stop supplier of laboratory, pilot-line and small-production battery equipment
- •Sells single machines and turnkey labs and lines
- •Suits start-up cell and pack plants, universities and R&D centres
What Tmax makes
Tmax’s catalogue covers almost every machine needed to set up a battery lab or a small cell or pack line, which is its main appeal: one supplier, one shipment, one set of paperwork.
- •Cell graders and testers. From small multi-channel testers to grading machines of several hundred channels for cylindrical and prismatic cells.
- •Pack testers. Charge-discharge systems for packs, including 60 V and 100 V models that cover two- and three-wheeler packs, and higher-voltage units for EV packs.
- •Pack assembly machines. Spot welders, cell sorters, insulation-paper applicators and pack test benches.
- •Lab and pilot lines. Coin-cell, pouch and cylindrical cell lines, with mixers, coaters and glove boxes.
- •Materials. Battery materials for research.
Strengths
- •A wide catalogue, so one supplier can equip most of a small plant
- •Three decades in business, with experience exporting turnkey lab projects
- •Flexible configurations, with custom voltages and currents on request
Limitations
- •Equipment comes from many product lines, and quality varies between them
- •Less precise and less software-rich than specialist tester makers
- •Prices are not published, and after-sales service depends on the project
Who it suits
Companies setting up their first pilot line or lab, and universities. For a pack assembler, Tmax can supply the whole bench at once; the trade-off is that a specialist’s tester or welder may outperform the equivalent machine from a generalist.
Before you buy
- •Ask for a full equipment list and floor layout for your planned capacity; Tmax quotes turnkey
- •Insist on a factory acceptance test, by visit or video, before the machines ship
- •Check spare parts, and the language of every machine’s software
Before buying from any Chinese supplier
Whichever maker you choose, the same checks apply: the exact specification you need, software that exports your data, 230 V operation, a calibration certificate, local service and spares, a factory acceptance test with your own cells, and the full landed cost from your customs agent. Our overview of Chinese battery test and assembly equipment sets these out and compares the other makers in the series.
Frequently asked questions
Is it better to buy a whole battery line from one supplier?+
It is simpler: one supplier, one shipment and one set of paperwork. The trade-off is that a specialist’s tester or welder may outperform a generalist’s, so ask for each machine priced separately and compare.
What should a factory acceptance test include?+
The machines running your own cells to your own test programme, by visit or on video, before the final payment. That proves the equipment does what was quoted before it ships.
Want this applied to your own numbers?
Every solution page carries a calculator that shows its own arithmetic — storage savings, lithium against lead-acid, and home pack sizing.